Publications

Jul, 2025

Journal

Performance Degradation of Amine-Infused Fiber Sorbents for Direct Air Capture: Mechanisms and Solutions

Sorbent stability poses significant impacts on long-term performance of direct air capture (DAC) of CO2 and levelized cost of capture (LCOC). We report the DAC performance degradation of amine-infused fiber sorbents based on poly(ethylenimine) (PEI), mesoporous SiO2, and cellulose acetate (CA) over CO2 cyclic sorption cycles in a nonoxidative environment. Infrared and nucl…

Nov, 2024

Journal

Demonstration of the carbon capture with building make-up air unit

Building-integrated carbon capture technology has the potential to reduce the cost of CO2 capture while improving indoor air quality (IAQ). To promote the adoption of CO2 capture in a building environment, this study investigated the possibility of integrating carbon capture technology with an existing rooftop make-up air unit (MAU) system to trap CO2. Here, a modular comp…

Jun, 2024

Journal

A multifunctional rooftop unit for direct air capture

Direct air capture (DAC), which captures CO2 from ambient air, is a critical technology to reduce greenhouse gases in the atmosphere in order to avoid climate disasters. Due to the relatively low concentration of CO2 (400 ppm), a large amount of air needs to be moved through DAC devices, which requires lots of energy. Currently, DAC technologies are deployed mainly in cent…

Jun, 2024

ORNL Report

PRODUCTION OF CARBON FIBER FROM ACPT’S PETROLEUM-BASED MESOPHASE PITCH: SUMMARY OF ACTIVITIES

Dec, 2023

Journal

Strategies toward the Synthesis of Advanced Functional Sorbent Performance for Uranium Uptake from Seawater

A polymer fiber-based adsorbent (AF1) composed of acrylonitrile and itaconic acid functional groups was synthesized by a radiation-induced graft polymerization technique onto hollow-gear shaped polyethylene (PE) fibers. Investigation of the optimum reaction parameters for the conversion of grafted cyano moieties into amidoxime groups was conducted by the reaction with hydr…

Nov, 2023

Journal

Solubility and volume swell of fuel system elastomers with ketone blends of E10 gasoline and blendstock for oxygenate blending (BOB)

The compatibility of key infrastructure elastomers with five ketone molecules was assessed via solubility studies and volume swell measurements. The elastomer materials included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one each of fluorosilicone, neoprene, polyurethane, styrene butadiene rubber (SBR), and silicone. The ketone molecules included ac…

Nov, 2023

ORNL Report

Level 4 Milestone Report (PNNL-26418) – Temperature Effects on the Adsorption Capacity of Uranium and Vanadium on Amidoxime-Based Polymeric Fiber Adsorbents in Natural Seawater

The Pacific Northwest National Laboratory (PNNL) has been conducting marine testing of uranium adsorbent materials for the Fuel Resources Program, Department of Energy, Office of Nuclear Energy (DOE-NE) beginning in FY 2012. The marine testing program is being conducted at PNNL’s Marine Sciences Laboratory (MSL), located at Sequim Bay, along the coast of Washington. One of…

Nov, 2023

Journal

Efficient Functionalization of Polyethylene Fibers for the Uranium Extraction from Seawater through Atom Transfer Radical Polymerization

Brush-on-brush structures are proposed as one method to overcome support effects in grafted polymers. Utilizing glycidyl methacrylate (GMA) grafted on polyethylene (PE) fibers using radiation-induced graft polymerization (RIGP) provides a hydrophilic surface on the hydrophobic PE. When integrated with atom transfer radical polymerization (ATRP), the grafting of acrylonitri…

Nov, 2023

ORNL Report

Summary of Adsorption Capacity and Adsorption Kinetics of Uranium and Other Elements on Amidoxime-based Adsorbents from Time Series Marine Testing at the Pacific Northwest National Laboratory

The Pacific Northwest National Laboratory (PNNL) has been conducting marine testing of uranium adsorbent materials for the Fuel Resources Program, Department of Energy, Office of Nuclear Energy (DOE-NE) beginning in FY 2012. The marine testing program is being conducted at PNNL’s Marine Sciences Laboratory (MSL), located at Sequim Bay, along the coast of Washington. One of…

Nov, 2023

Journal

Compatibility Assessment of Fuel System Infrastructure Plastics with Bio-oil and Diesel Fuel

Bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with 18 plastic types was evaluated using neat diesel fuel as the baseline. The plastic materials included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF),…

Nov, 2023

Journal

High−Speed Electron Beam Curing of Thick Electrode for High Energy Density Li-ion Batteries

Electron beam curing is demonstrated as a promising method for high speed, low cost and environmentally friendly battery electrode manufacturing. This work reports transfer of this process to pilot scale equipment and evaluation of electrochemical performance in prototype 1.5 Ah pouch cells. Thick LiNi0.5Mn0.3Co0.2O2 (NMC532) composite electrodes with an areal loading of 2…

Nov, 2023

Journal

Influence of biodiesel decomposition chemistry on elastomer compatibility

The compatibility of biodiesel blends with five common elastomers (acrylonitrile rubber or NBR, fluorocarbon, neoprene, ethylene propylene diene monomer or EPDM, and silicone) was assessed using Hansen solubility parameters. A solubility analysis was performed over the full diesel blend range and the model used methyl hydroperoxide, acetaldehyde, and formic acid to represe…