Showing 55 results for Author: Matthew G. Boebinger
Sep, 2026
Journal
Binary metal oxide nanoparticles (biMO-NPs) combining transition and main-group metals with well-organized atomic architectures have unique potential as robust and economical heterogeneous catalysts. Herein, metal oxide nanoparticles (CoAlxOy) using cobalt and aluminum were synthesized, and their structure, morphology, and chemical composition were investigated using vario…
Aug, 2026
Journal
Single-atom catalysts (SACs) have attracted significant attention in electrocatalysis due to their high metal utilization and tunable electronic structures; however, their practical implementation is often limited by poor atomic dispersion, low metal loadings (typically < 1 wt%), and insufficient anchoring of single metal atoms on catalyst supports. Herein, we report a sim…
Jul, 2026
Journal
Spinel LiNi0.5Mn1.5O4 offers both the high-rate, low-cost and safety advantages of LiFePO4 and the high energy density of LiNiₓMnᵧCo₁₋ₓ₋ᵧO₂ and LiNiₓCoᵧAlzO₂ cathodes. However, the large operating voltage of these materials induces electrolyte oxidation, which degrades the interface and drives Mn dissolution. These reactions are further exacerbated at high rates due to tem…
Jul, 2026
Journal
Binder Jet Additive Manufacturing (BJAM) is a promising manufacturing pathway to produce H13 steel dies and tooling with complex geometries for applications in high pressure aluminum die casting, hot stamping, and injection molding. While fully dense H13 coupons produced using BJAM have been subjected to detailed microstructure characterization, properties which are critic…
Jun, 2026
Journal
Materials with desired quantum properties can be engineered from atomic scale assembly techniques, but existing methods often lack the agility and accuracy to precisely and intelligently control the manufacturing process. Here we demonstrate a fully autonomous approach to fabricating atomic-level defects using electron beams in scanning transmission electron microscopy (ST…
Apr, 2026
ORNL Report
Apr, 2026
Journal
Despite the promise of fuel cells as sustainable energy conversion technologies, their widespread adoption is hindered by the high cost of platinum group metal (PGM) catalysts, particularly for catalyzing the oxygen reduction reaction (ORR) at the cathode. Here, we report copper-based single-atom catalysts (Cu-SACs) as cost-effective non-PGM alternatives for ORR. The catal…
Apr, 2026
Journal
Brucite [Mg(OH)2] is a promising sorbent for carbon dioxide removal (CDR) due to its availability and low calcination temperatures. However, natural and synthetic brucites tend to contain metal impurities, such as iron or manganese, and how these impurities affect the interfacial chemical reactivity is uncertain. Here, the impact of low concentrations of iron and manganese…
Mar, 2026
Journal
Grain boundary segregating alloys, a class of alloys designed such that nanocrystalline grain sizes are thermodynamically stabilized by the presence of high segregation energy solutes at the grain boundaries, are typically produced through geometrically limited processing techniques such as equal channel angular extrusion or thin film sputtering. This study explores the us…
Mar, 2026
Conference Paper
Mar, 2026
Journal
Recovery of magnesium from brines can potentially be used to source MgO (periclase) as a CO2 sorbent or for Mg-based cements. However, it is not clear how common impurities in brines, such as lithium, affect the resulting MgO reactivity. To test the effect of lithium incorporation on MgO reactivity for hydration and carbonation, we combined computational simulations with e…