- By:
- Nayir, Selda ; Knapp, Gerald L; Plotkowski, Alexander J; Massey, Caleb P; Coleman, John S; Joslin, Chase B; List III, Frederick A; Nandwana, Peeyush
- Journal Name:
- Materials Characterization
- Page Number:
- 114860
- Volume:
- 223
- Publication Date:
- April 29, 2025
- View DOI Listing:
- https://doi.org/10.1016/j.matchar.2025.114860
Abstract
The high solidification rates during additive manufacturing cause highly localized thermal and strain gradients. The effect of these gradients on the evolution of local orientation misorientations within a grain is not well understood. In this study, stainless steel 316H parts were fabricated via laser powder bed fusion using three different energy densities: 43, 71, and 135 J/mm3. Electron backscatter diffraction showed that the maximum misorientations of the grains can be up to 25° along the build direction. Misorientation gradients (RMg) within grains are process-dependent and can change from 0.036°/μm to 0.015°/μm with increased volumetric energy densities. The characterized misorientation gradients are an indication of the level of dislocations and, to an extent, the plastic deformation resulting from the rapid solidification during laser powder bed fusion.
